Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
GOTTA HAVE IT?
Click WHERE TO BUY above to find a Theory partner near you.
iws12-9 SPECIFICATIONS
| Description: | 12” High-Output Subwoofer for In-Ceiling, Surface Mount or Flying |
| Operation: | Passive, Requires 1 Theory ALC Amp channel |
| DSP Requirements: | Requires Model-Specific Theory-Certified DSP Loudspeaker Processing |
| Drivers: | 1 x 12" Theory 1400W 4” Voice Coil Long Throw Woofer |
| Enclosure: | Multi Plywood, Metal Protection or Perforated Grille |
| Terminals: | |
| Mounting Points: | Yoke Surface Mount Brackets |
| Outdoor Capability: | Indoor and Outdoor Use |
| Bandwidth: | 24Hz -125Hz, - 3dB; |
| Sensitivity: | 95.5 dB |
| Power Handling: | 700W (AES) |
| 1400 (Continual); | |
| 2800 (Peak) | |
| Minimum recommended Power: | 250W |
| Max Output: | 124 dB SPL / 1m |
| Nominal Impedance: | 8-ohms |
| Colors: | Black |
| Dimensions: | 34” W x 14” H x 9”D (864mm W x 356mm H x 229mm D) |
| Total Installed Depth: | |
| Weight: | 49 lbs. (22.2 kg) |
| Included Accessories | Rubber Isolation Feet |
| Black Full Coverage Perforated Metal Grille | |
| M10 Rigging Eyebolts | |
| Optional Accessories | Yoke Surface Mount Bracket |
iws12-9 ACCESSORIES
CAN YOU TAKE A YOKE?
The iws12-9 ships with robust rubber isolation feet for sitting the enclosure on the ground or appropriate shelf, or the optional Yoke Bracket allows the iws12-9 subwoofer to be mounted to any appropriate surface, ceiling or wall.
WOULD YOU LIKE THAT GRILLED?
The iws12-9 subwoofer can be used without a grille, with optional Zero-Noise Protection Grid shown here, or with the optional Full Coverage Grille which protects not only the drive unit, but also entrances to the tuned ports.
