DLC-1500.4 AMPLIFIED LOUDSPEAKER CONTROLLER -- (DISCONTINUED)
THIS PRODUCT HAS BEEN DISCONTINUED. PLEASE SPECIFY NEW MODEL: DLC-1500.4d — AVAILABLE IN MAY 2024
The DLC-1500.4 delivers a massive 3000W in a 16 pound chassis. Capable of delivering 1500W into 4, 8, and 16-ohms from any channel pair, or 800W into 4, 8 or 16-ohms all channels driven, this 16lb., 2U loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-1500.4 can drive 70V/100V hi-Z loudspeakers direct - no internal transformer required.
The DLC-1500.4 can drive up to 16 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 400 (!) in Hi-Z mode. You read that right, 400 Theory speakers at 7.5W each.
The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board Wifi access point and includes parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.
Full API and modules for Crestron, Control4 and Q-SYS available.
DLC-1500.4 SPECIFICATIONS
| Description: | 4-Channel Amplified Distribution Loudspeaker Controller |
| 2U Chassis | |
| IP Control via Ethernet or Built-In WiFi Access Point | |
| Power Sharing Between Neighboring Channels | |
| LoZ and HiZ (70V/100V) Operation | |
| Inputs: | 4 x Balanced Analog Audio |
| 4 x RCA Unbalanced Analog Audio | |
| 1 x S/PDIF Digital Audio | |
| Outputs: | 4 x Speaker Outputs |
| S/PDIF Digital Audio | |
| Trigger: | +12VDC |
| Audio Operation: | 48kHz/24-bit |
| On-Board DSP: | 48kHz/32-bit |
| DSP Features: | Loudspeaker Processing For All Theory Models |
| 10 Parametric EQ Filters | |
| Crossovers | |
| Input Trim | |
| Signal Routing | |
| Gain | |
| Delay | |
| Polarity | |
| Limiter | |
| Frequency Response: | 20Hz-20kHz, +/-0.25dB |
| Power Output: | 2x 1500W (BTL) @ 100V |
| 2x 1200W (BTL) @ 70V | |
| 4x 400W (SE) and 2x 1500W (BTL) @ 8-ohms | |
| 4x 800W (SE) and 2x 1500W (BTL) @ 4-ohms | |
| 4x 800W (SE) @ 2-ohms | |
| Voltage Gain: | Variable |
| Input Sensitivity (selectable): | +14dBu |
| +4dBu | |
| -10dBV (Unbalanced RCA) | |
| Microphone | |
| Power Requirements: | Standby: <1W |
| (1/8 power, all ch. driven): 470W | |
| Idle Noise(A-Wt): | -78dBV |
| Signal to Noise Ratio: | >106dB |
| Distortion (1kHz, 1dB below max output): | <0.02% |
| AC Operation: | 100V-240VAC, 50-60Hz |
| Terminals: | Eurblock Connector with Parallel Output |
| Outdoor Capability: | Indoor Use Only |
| Mounting Points: | Rack Mount Ears Included |
| Finish: | Matte Black |
| Dimensions: | 3.50" H x 19" W x 12.6" D (89mm H x 483mm W x 320mm D) |
| Weight: | 16.5 lbs. (7.5 kg) |
| Included Accessories: | Rack Ears |
DLC USER INTERFACE
DLC-1500.4 DOWNLOADS
DLC-1500.4 3-View Product Drawing
DLC-1500.4 Quick Start Installation Guide
DLC Third Party Control Drivers
DLC-1500.4 GALLERY
DLC-1500.4 4-Channel Amplified Loudspeaker Controller